Hi Suzuki
On Wed, 28 Nov 2018 at 10:44, Suzuki K Poulose suzuki.poulose@arm.com wrote:
Hi Mike,
On 28/11/2018 10:14, Mike Leach wrote:
The CoreSight specification (ARM IHI 0029E), updates the ID register requirements for components on an AMBA bus, to cover both traditional ARM Primecell type devices, and newer CoreSight and other components.
The Peripheral ID (PID) / Component ID (CID) pair is extended in certain cases to uniquely identify components. CoreSight components related to a single function can share Peripheral ID values, and must be further identified using a Unique Component Identifier (UCI). e.g. the ETM, CTI, PMU and Debug hardware of the A35 all share the same PID.
Bits 11:8 of the CID are defined to be the device class. Class 0xF remains for PrimeCell and legacy components. Class 0x9 defines the component as CoreSight (CORESIGHT_CID above) Class 0x0, 0x1, 0xB, 0xE define components that do not have driver support at present. Class 0x2-0x8,0xA and 0xD-0xD are presently reserved.
The specification futher defines which classes of device use the standard CID/PID pair, and when additional ID registers are required.
The patches provide an update of amba_device and matching code to handle the additional registers required for the Class 0x9 (CoreSight) UCI. The *data pointer in the amba_id is used by the driver to provide extended ID register values for matching.
CoreSight components where PID/CID pair is currently sufficient for unique identification need not provide this additional information.
Signed-off-by: Mike Leach mike.leach@linaro.org
drivers/amba/bus.c | 49 +++++++++++++++++++++++++++++++++------- include/linux/amba/bus.h | 32 ++++++++++++++++++++++++++ 2 files changed, 73 insertions(+), 8 deletions(-)
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 41b706403ef7..387ee8f7720b 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -26,19 +26,40 @@
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
-static const struct amba_id * -amba_lookup(const struct amba_id *table, struct amba_device *dev) +/* called on periphid match and class 0x9 coresight device. */ +static int +amba_cs_uci_id_match(const struct amba_id *table, struct amba_device *dev) { int ret = 0;
struct amba_cs_uci_id *uci;uci = table->data;/* no table data - return match on periphid */if (!uci)return 1;if (uci->devarch) {minor nit: It would be good to check the devarch_mask instead, as we will be covered if at all there is an expected devarch == 0. But the mask can never be 0, if we have something to check.
There is an expected devarch == 0 - it is defined in the spec as when devarch is not implemented - hence the explicit test here. If there is no devarch - then we can match on devtype alone.
ret = (dev->uci.devtype == uci->devtype) &&((dev->uci.devarch & uci->devarch_mask) == uci->devarch);} else {/* devtype only if devarch set to 0 */ret = dev->uci.devtype == uci->devtype;}return ret;+}
+static const struct amba_id * +amba_lookup(const struct amba_id *table, struct amba_device *dev) +{ while (table->mask) {
ret = (dev->periphid & table->mask) == table->id;if (ret)break;
if (((dev->periphid & table->mask) == table->id) &&((dev->cid != CORESIGHT_CID) ||(amba_cs_uci_id_match(table, dev))))return table; table++; }
return ret ? table : NULL;
return NULL;}
static int amba_match(struct device *dev, struct device_driver *drv)
@@ -399,10 +420,22 @@ static int amba_device_try_add(struct amba_device *dev, struct resource *parent) cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8);
if (cid == CORESIGHT_CID) {/* set the base to the start of the last 4k block */void __iomem *csbase = tmp + size - 4096;dev->uci.devarch =readl(csbase + UCI_REG_DEVARCH_OFFSET);dev->uci.devtype =readl(csbase + UCI_REG_DEVTYPE_OFFSET) & 0xff;}amba_put_disable_pclk(dev);
if (cid == AMBA_CID || cid == CORESIGHT_CID)
if (cid == AMBA_CID || cid == CORESIGHT_CID) { dev->periphid = pid;dev->cid = cid;} if (!dev->periphid) ret = -ENODEV;diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index d143c13bed26..ff0ce0587ee9 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -25,6 +25,36 @@ #define AMBA_CID 0xb105f00d #define CORESIGHT_CID 0xb105900d
+/*
- CoreSight Architecture specification updates the ID specification
- for components on the AMBA bus. (ARM IHI 0029E)
- Bits 11:8 of the CID are the device class.
I think this should be Bits 15:12 ?
It should.
Thanks
Mike
- Class 0xF remains for PrimeCell and legacy components. (AMBA_CID above)
- Class 0x9 defines the component as CoreSight (CORESIGHT_CID above)
- Class 0x0, 0x1, 0xB, 0xE define components that do not have driver support
- at present.
- Class 0x2-0x8,0xA and 0xD-0xD are presently reserved.
- Remaining CID bits stay as 0xb105-00d
- */
+/*
- Class 0x9 components use additional values to form a Unique Component
- Identifier (UCI), where peripheral ID values are identical for different
- components. Passed to the amba bus code from the component driver via
- the amba_id->data pointer.
- */
+struct amba_cs_uci_id {
unsigned int devarch;unsigned int devarch_mask;unsigned int devtype;+};
+#define UCI_REG_DEVTYPE_OFFSET 0xFCC +#define UCI_REG_DEVARCH_OFFSET 0xFBC
struct clk;
struct amba_device {
@@ -32,6 +62,8 @@ struct amba_device { struct resource res; struct clk *pclk; unsigned int periphid;
unsigned int cid;struct amba_cs_uci_id uci; unsigned int irq[AMBA_NR_IRQS]; char *driver_override;Rest looks fine. With the above addressed,
Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com