CoreSight August 2025

coresight@lists.linaro.org

7 participants
42 discussions

[PATCH v1 0/5] coresight: Fix device registration and unregistration

by Leo Yan

This series is to fix device registration and unregistration. The first patch addresses the resource is not released properly for a failure case during a device registration. The second patch is to use mutex to protect unregistration flow. The last three patches are for refactoring. Patch 03 explicitly uses the parent device handler. Patch 04 separates the success and failure flows for code readable and easier maintenance. Patch 05 improves the error handling by invoking specific functions for resource cleanup. Leo Yan (5): coresight: Correct sink ID map allocation failure handling coresight: Protect unregistration with mutex coresight: Explicitly use the parent device handler coresight: Separate failure and success flows coresight: Refine error handling for device registration drivers/hwtracing/coresight/coresight-core.c | 67 +++++++++++--------- 1 file changed, 37 insertions(+), 30 deletions(-) -- 2.34.1

1 day, 18 hours

[PATCH v3 0/3] Coresight TMC-ETR some bugfixes and cleanups

by Junhao He

This patchset builds upon Yicong's previous patches [1]. Introducing fix two race issues found by using TMC-ETR and CATU, Two cleanups found when debugging the issues. [1] https://lore.kernel.org/linux-arm-kernel/20241202092419.11777-1-yangyicong@… --- Changes in v3: - Patches 1: Additional comment for tmc_drvdata::etr_mode. Update comment for tmc_drvdata::reading with Jonathan's Tag. - Patches 2: Replace scoped_guard with guard with Jonathan's Tag. - Patches 2: Fix spinlock to raw_spinlock, and refactor this code based on Leo's suggested solution. - Patches 3: change the size's type to ssize_t and use max_t to simplify the code with Leo's Tag. Link: https://lore.kernel.org/linux-arm-kernel/20250620075412.952934-1-hejunhao3@… Changes in v2: - Updated the commit of patch2. - Rebase to v6.16-rc1 Junhao He (1): coresight: tmc: refactor the tmc-etr mode setting to avoid race conditions Yicong Yang (2): coresight: tmc: Add missing doc including reading and etr_mode of struct tmc_drvdata coresight: tmc: Decouple the perf buffer allocation from sysfs mode .../hwtracing/coresight/coresight-tmc-etr.c | 110 ++++++++---------- drivers/hwtracing/coresight/coresight-tmc.h | 2 + 2 files changed, 53 insertions(+), 59 deletions(-) -- 2.33.0

1 day, 18 hours

[PATCH v6 00/10] coresight: Fix and improve clock usage

by Leo Yan

This series fixes and improves clock usage in the Arm CoreSight drivers. Based on the DT binding documents, the trace clock (atclk) is defined in some CoreSight modules, but support is absent. In most cases, the issue is hidden because the atclk clock is shared by multiple CoreSight modules and the clock is enabled anyway by other drivers. The first three patches address this issue. The programming clock (pclk) management in CoreSight drivers does not use the devm_XXX() variant APIs, the drivers needs to manually disable and release clocks for errors and for normal module exit. However, the drivers miss to disable clocks during module exit. The atclk may also not be disabled in CoreSight drivers during module exit. By using devm APIs, patches 04 and 05 fix clock disabling issues. Another issue is pclk might be enabled twice in init phase - once by AMBA bus driver, and again by CoreSight drivers. This is fixed in patch 06. Patches 07 to 10 refactor the clock related code. Patch 07 consolidates the clock initialization into a central place. Patch 08 polishes driver data allocation. Patch 09 makes the clock enabling sequence consistent. Patch 09 removes redundant condition checks and adds error handling in runtime PM. This series has been verified on Arm64 Juno platform, for both DT and ACPI modes. Also tested on Hikey960 for emulating static funnel and replicator without clock nodes. Mark kindly tested on imx8mp board. --- Changes in v6: - Changed to devm_clk_get_optional_enabled() for pclk, for fixing the clock initialization failure reported by Mark. - Added James test tags as no change for ACPI. - Link to v5: https://lore.kernel.org/r/20250724-arm_cs_fix_clock_v4-v5-0-63f648dae021@ar… Changes in v5: - Skip clock management for ACPI devices (Suzuki). - Link to v4: https://lore.kernel.org/r/20250627-arm_cs_fix_clock_v4-v4-0-0ce0009c38f8@ar… Changes in v4: - Separated patch 07 into two patches, one is for clock consolidation and another is for polishing driver data allocation (Anshuman). Changes in v3: - Updated subjects for patches 04 and 05 (Anshuman). - Refined condition checking "if (dev_is_amba(dev))" in patch 07 (Anshuman). --- Leo Yan (10): coresight: tmc: Support atclk coresight: catu: Support atclk coresight: etm4x: Support atclk coresight: Appropriately disable programming clocks coresight: Appropriately disable trace bus clocks coresight: Avoid enable programming clock duplicately coresight: Consolidate clock enabling coresight: Refactor driver data allocation coresight: Make clock sequence consistent coresight: Refactor runtime PM drivers/hwtracing/coresight/coresight-catu.c | 53 ++++++++--------- drivers/hwtracing/coresight/coresight-catu.h | 1 + drivers/hwtracing/coresight/coresight-core.c | 48 ++++++++++++++++ drivers/hwtracing/coresight/coresight-cpu-debug.c | 41 +++++--------- drivers/hwtracing/coresight/coresight-ctcu-core.c | 24 +++----- drivers/hwtracing/coresight/coresight-etb10.c | 18 ++---- drivers/hwtracing/coresight/coresight-etm3x-core.c | 17 ++---- drivers/hwtracing/coresight/coresight-etm4x-core.c | 32 ++++++----- drivers/hwtracing/coresight/coresight-etm4x.h | 4 +- drivers/hwtracing/coresight/coresight-funnel.c | 66 ++++++++-------------- drivers/hwtracing/coresight/coresight-replicator.c | 63 ++++++++------------- drivers/hwtracing/coresight/coresight-stm.c | 34 +++++------ drivers/hwtracing/coresight/coresight-tmc-core.c | 48 ++++++++-------- drivers/hwtracing/coresight/coresight-tmc.h | 2 + drivers/hwtracing/coresight/coresight-tpiu.c | 36 +++++------- include/linux/coresight.h | 31 +--------- 16 files changed, 228 insertions(+), 290 deletions(-) --- base-commit: a80198ba650f50d266d7fc4a6c5262df9970f9f2 change-id: 20250627-arm_cs_fix_clock_v4-e24b1e1f8920 Best regards, -- Leo Yan <leo.yan(a)arm.com>

1 week

[PATCH v2 00/28] CoreSight: Address CPU Power Management Issues

by Leo Yan

This series addresses CPU power management issues in the CoreSight drivers. For easier review, the patches are organized into two categories: o Patches 01 ~ 10 focus on CPU power management within the ETM drivers. These patches fix SMP-safe access to the mode, correct context synchronization, and refactor the CPU suspend/resume flows. o Patches 11 ~ 28 extend CPU power management to cover activated paths, including helpers, links, and sinks. These changes move CPU PM and hotplug notifiers from the ETMv4 driver into the CoreSight core layer. Summary of Changes: - Patches 01 ~ 03: Fix device mode access in the SMP mode. - Patch 04 : A minor fix for polling bit. - Patches 05 ~ 07: Improve the context synchronization based on the ETM specification (IHI0064H.b) and Arm ARM (ARM DDI 0487 L.a). - Patches 08 ~ 10: Refactor the context save/restore flow in the ETMv4 driver, in the end, the CPU PM callbacks reuse the normal enabling and disabling flows. - Patches 11 ~ 17: Move CPU PM code from ETMv4 driver to the core layer. - Patches 18 ~ 25: Enhance device mode handling in the CTI driver, distinguishes debug mode from trace modes (Perf or SysFS mode). Extend support activated paths during CPU idle. Support save and restore context for per-CPU sink (TRBE). - Patches 26 ~ 28: Move CPU hotplug notifier from the ETMv4 driver to the core layer. The full path is now managed in CPU hotplug. Verification: This series has been verified on the following platforms: - Hikey960, Juno-r0 and Juno-r2: Note that the firmware on Hikey960 and Juno-r0 is unstable. While no CoreSight failures were observed, but the CPU hotplug or CPU idle itself may fail intermittently. Juno-r2 is much stable and can pass 24+ hours stress test. - FVP RevC: Verified TRBE changes. Stress test script: #!/usr/bin/bash echo 1 > /sys/bus/coresight/devices/tmc_etr0/enable_sink while true; do echo 0 > /sys/devices/system/cpu/cpu2/online; echo 1 > /sys/devices/system/cpu/cpu2/online; done & while true; do echo 1 > /sys/bus/coresight/devices/etm2/enable_source; echo 0 > /sys/bus/coresight/devices/etm2/enable_source; done & --- Changes in v2: - Refactored ETMv4 suspend and resume for reusing the normal enabling and disabling flows (James). - Used a per-CPU structure to maintain path pointers (James). - Supported helpers in CPU PM flows (James). - Fixed the SMP-safe access to device mode. - Fixed the context synchronization in ETMv4x driver. - Link to v1: https://lore.kernel.org/linux-arm-kernel/20250516160742.1200904-1-leo.yan@a… Signed-off-by: Leo Yan <leo.yan(a)arm.com> --- Leo Yan (27): coresight: Change device mode to atomic type coresight: etm4x: Always set tracer's device mode on target CPU coresight: etm3x: Always set tracer's device mode on target CPU coresight: etm4x: Correct polling IDLE bit coresight: etm4x: Ensure context synchronization is not ignored coresight: etm4x: Add context synchronization before enabling trace coresight: etm4x: Properly control filter in CPU idle with FEAT_TRF coresight: etm4x: Remove the state_needs_restore flag coresight: etm4x: Add flag to control single-shot restart coresight: etm4x: Reuse normal enable and disable logic in CPU idle coresight: Populate CPU ID into the coresight_device structure coresight: sysfs: Validate CPU online status for per-CPU sources coresight: Set per CPU source pointer coresight: Register CPU PM notifier in core layer coresight: etm4x: Hook CPU PM callbacks coresight: Add callback to determine if context save/restore is needed coresight: etm4x: Remove redundant condition checks in save and restore coresight: cti: Fix race condition by using device mode coresight: cti: Introduce CS_MODE_DEBUG mode coresight: cti: Properly handle modes in CPU PM notifiers coresight: Add per-CPU path pointer coresight: Add 'in_idle' argument to path enable/disable functions coresight: Control path during CPU idle coresight: Add PM callbacks for percpu sink coresight: Take hotplug lock in enable_source_store() for Sysfs mode coresight: Move CPU hotplug callbacks to core layer coresight: Manage activated path during CPU hotplug Yabin Cui (1): coresight: trbe: Save and restore state across CPU low power state drivers/hwtracing/coresight/coresight-catu.c | 1 + drivers/hwtracing/coresight/coresight-core.c | 337 ++++++++++++-- drivers/hwtracing/coresight/coresight-ctcu-core.c | 1 + drivers/hwtracing/coresight/coresight-cti-core.c | 40 +- drivers/hwtracing/coresight/coresight-cti-sysfs.c | 2 +- drivers/hwtracing/coresight/coresight-dummy.c | 1 + drivers/hwtracing/coresight/coresight-etb10.c | 1 + drivers/hwtracing/coresight/coresight-etm3x-core.c | 61 ++- drivers/hwtracing/coresight/coresight-etm4x-core.c | 488 ++++++--------------- drivers/hwtracing/coresight/coresight-etm4x.h | 62 --- drivers/hwtracing/coresight/coresight-funnel.c | 1 + drivers/hwtracing/coresight/coresight-replicator.c | 1 + drivers/hwtracing/coresight/coresight-stm.c | 1 + drivers/hwtracing/coresight/coresight-sysfs.c | 10 + drivers/hwtracing/coresight/coresight-tmc-core.c | 1 + drivers/hwtracing/coresight/coresight-tpda.c | 1 + drivers/hwtracing/coresight/coresight-tpdm.c | 1 + drivers/hwtracing/coresight/coresight-tpiu.c | 1 + drivers/hwtracing/coresight/coresight-trbe.c | 85 ++++ drivers/hwtracing/coresight/ultrasoc-smb.c | 1 + include/linux/coresight.h | 55 ++- 21 files changed, 665 insertions(+), 487 deletions(-) --- base-commit: 66701750d5565c574af42bef0b789ce0203e3071 change-id: 20250611-arm_cs_pm_fix_v3-f4ae29bb7d81 Best regards, -- Leo Yan <leo.yan(a)arm.com>

1 week, 1 day

[PATCH v3 0/3] coresight-tnoc: Add support for Interconnect TNOC

by Yuanfang Zhang

This patch series adds support for the Qualcomm CoreSight Interconnect TNOC (Trace Network On Chip) block, which acts as a CoreSight graph link forwarding trace data from subsystems to the Aggregator TNOC. Unlike the Aggregator TNOC, this block does not support aggregation or ATID assignment. Signed-off-by: Yuanfang Zhang <yuanfang.zhang(a)oss.qualcomm.com> --- Changes in v3: - Add detail for changes in V2. - Remove '#address-cells' and '#size-cells' properties from in-ports field. - Fix comment indentation for packet description. - Link to v2: https://lore.kernel.org/r/20250819-itnoc-v2-0-2d0e6be44e2f@oss.qualcomm.com Changes in v2: - Removed the trailing '|' after the description in qcom,coresight-itnoc.yaml. - Dropped the 'select' section from the YAML file. - Updated node name to use a more generic naming convention. - Removed the 'items' property from the compatible field. - Deleted the description for the reg property. - Dropped clock-names and adjusted the order of clock-names and clocks. - Moved additionalProperties to follow the $ref of out-ports. - Change "atid" type from u32 to int, set it as "-EOPNOTSUPP" for non-AMBA device. - Link to v1: https://lore.kernel.org/r/20250815-itnoc-v1-0-62c8e4f7ad32@oss.qualcomm.com --- Yuanfang Zhang (3): dt-bindings: arm: qcom: Add Coresight Interconnect TNOC coresight-tnoc: add platform driver to support Interconnect TNOC coresight-tnoc: Add runtime PM support for Interconnect TNOC .../bindings/arm/qcom,coresight-itnoc.yaml | 90 +++++++++++++ drivers/hwtracing/coresight/coresight-tnoc.c | 139 +++++++++++++++++++-- 2 files changed, 216 insertions(+), 13 deletions(-) --- base-commit: 2b52cf338d39d684a1c6af298e8204902c026aca change-id: 20250815-itnoc-460273d1b80c Best regards, -- Yuanfang Zhang <yuanfang.zhang(a)oss.qualcomm.com>

2 weeks

Re: [PATCH v3 0/3] add sysfs nodes to configure TPDA's registers

by James Clark

On 27/08/2025 11:55 am, Jie Gan wrote: > Patchset 1 introduces configuration of the cross-trigger registers with > appropriate values to enable proper generation of cross-trigger packets. > > Patchset 2 introduces a logic to configure the TPDA_SYNCR register, > which determines the frequency of ASYNC packet generation. These packets > assist userspace tools in accurately identifying each valid packet. > > Patchset 3 introduces a sysfs node to initiate a flush request for the > specific port, forcing the data to synchronize and be transmitted to the > sink device. > > Changes in V3: > 1. Optimizing codes according to James's comment. > Link to V2 - https://lore.kernel.org/all/20250827042042.6786-1-jie.gan@oss.qualcomm.com/ > > Changes in V2: > 1. Refactoring the code based on James's comment for optimization. > Link to V1 - https://lore.kernel.org/all/20250826070150.5603-1-jie.gan@oss.qualcomm.com/ > > Tao Zhang (3): > coresight: tpda: add sysfs nodes for tpda cross-trigger configuration > coresight: tpda: add logic to configure TPDA_SYNCR register > coresight: tpda: add sysfs node to flush specific port > > .../testing/sysfs-bus-coresight-devices-tpda | 50 ++++ > drivers/hwtracing/coresight/coresight-tpda.c | 278 ++++++++++++++++++ > drivers/hwtracing/coresight/coresight-tpda.h | 33 ++- > 3 files changed, 360 insertions(+), 1 deletion(-) > create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda > Reviewed-by: James Clark <james.clark(a)linaro.org>

2 weeks, 2 days

Re: [PATCH v2 3/3] coresight: tpda: add sysfs node to flush specific port

by James Clark

On 27/08/2025 10:48 am, Jie Gan wrote: > > > On 8/27/2025 5:17 PM, James Clark wrote: >> >> >> On 27/08/2025 5:20 am, Jie Gan wrote: >>> From: Tao Zhang <tao.zhang(a)oss.qualcomm.com> >>> >>> Setting bit i in the TPDA_FLUSH_CR register initiates a flush request >>> for port i, forcing the data to synchronize and be transmitted to the >>> sink device. >>> >>> Signed-off-by: Tao Zhang <tao.zhang(a)oss.qualcomm.com> >>> Co-developed-by: Jie Gan <jie.gan(a)oss.qualcomm.com> >>> Signed-off-by: Jie Gan <jie.gan(a)oss.qualcomm.com> >>> --- >>> .../testing/sysfs-bus-coresight-devices-tpda | 7 ++++ >>> drivers/hwtracing/coresight/coresight-tpda.c | 42 +++++++++++++++++++ >>> drivers/hwtracing/coresight/coresight-tpda.h | 2 + >>> 3 files changed, 51 insertions(+) >>> >>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices- >>> tpda b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda >>> index fb651aebeb31..2cf2dcfc13c8 100644 >>> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda >>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda >>> @@ -41,3 +41,10 @@ Contact: Jinlong Mao >>> <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qu >>> Description: >>> (RW) Configure the CMB/MCMB channel mode for all enabled >>> ports. >>> Value 0 means raw channel mapping mode. Value 1 means >>> channel pair marking mode. >>> + >>> +What: /sys/bus/coresight/devices/<tpda-name>/port_flush_req >>> +Date: August 2025 >>> +KernelVersion: 6.17 >>> +Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang >>> <tao.zhang(a)oss.qualcomm.com>, Jie Gan <jie.gan(a)oss.qualcomm.com> >>> +Description: >>> + (RW) Configure the bit i to requests a flush operation of >>> port i on the TPDA. >>> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/ >>> hwtracing/coresight/coresight-tpda.c >>> index 430f76c559f2..8b1fe128881d 100644 >>> --- a/drivers/hwtracing/coresight/coresight-tpda.c >>> +++ b/drivers/hwtracing/coresight/coresight-tpda.c >>> @@ -487,6 +487,47 @@ static ssize_t cmbchan_mode_store(struct device >>> *dev, >>> } >>> static DEVICE_ATTR_RW(cmbchan_mode); >>> +static ssize_t port_flush_req_show(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf) >>> +{ >>> + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); >>> + unsigned long val; >>> + >>> + if (!drvdata->csdev->refcnt) >>> + return -EINVAL; >>> + >>> + guard(spinlock)(&drvdata->spinlock); >>> + CS_UNLOCK(drvdata->base); >>> + val = readl_relaxed(drvdata->base + TPDA_FLUSH_CR); >>> + CS_LOCK(drvdata->base); >>> + return sysfs_emit(buf, "%lx\n", val); >> >> Still missing the 0x prefix > > Will re-check rest of the codes and add prefix. Sorry I missed it during > the review process. > >> >>> +} >>> + >>> +static ssize_t port_flush_req_store(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buf, >>> + size_t size) >>> +{ >>> + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); >>> + unsigned long val; >>> + >>> + if (kstrtoul(buf, 0, &val)) >>> + return -EINVAL; >>> + >>> + if (!drvdata->csdev->refcnt || !val) >>> + return -EINVAL; >>> + >>> + val |= FIELD_PREP(TPDA_MAX_INPORTS_MASK, val); >> >> Using FIELD_PREP() now that it's the full width of the register makes >> less sense. Especially when there is no corresponding FIELD_FIT() >> check, which is fine because everything always fits. But if you >> didn't know the mask was the full width you'd wonder if the check is >> missing. >> >> I would just write val directly to TPDA_FLUSH_CR so it's simpler. >> >> It should also have been val = FIELD_PREP(...) > > Yeah, it should have been val = FIELD_PREP(...) here... sorry for the > mistake here.. > > I was thinking the unsigned long here could be 64 or 32 bits and we only > need the value of the lower 32 bits. So that's why I am using val = > FIELD_PREP(...) here. We shouldn't write a value greater than UINT32_MAX > to the register. > > Thanks, > Jie > writel_relaxed() is always 32 bits though so it is a bit confusing if you truncate the user value without an error. Also a reason to use u32 instead of unsigned long types. Are you trying to support arm and arm64 with tpda? Or just arm64? For it to be consistent you can use kstrtou32(), or use kstrtoull() and then FIELD_FIT() to error on truncation. kstrtou32() is probably the cleanest. >> >>> + guard(spinlock)(&drvdata->spinlock); >>> + CS_UNLOCK(drvdata->base); >>> + writel_relaxed(val, drvdata->base + TPDA_FLUSH_CR); >>> + CS_LOCK(drvdata->base); >>> + >>> + return size; >>> +} >>> +static DEVICE_ATTR_RW(port_flush_req); >>> + >>> static struct attribute *tpda_attrs[] = { >>> &dev_attr_trig_async_enable.attr, >>> &dev_attr_trig_flag_ts_enable.attr, >>> @@ -494,6 +535,7 @@ static struct attribute *tpda_attrs[] = { >>> &dev_attr_freq_ts_enable.attr, >>> &dev_attr_global_flush_req.attr, >>> &dev_attr_cmbchan_mode.attr, >>> + &dev_attr_port_flush_req.attr, >>> NULL, >>> }; >>> diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/ >>> hwtracing/coresight/coresight-tpda.h >>> index 8e1b66115ad1..56d3ad293e46 100644 >>> --- a/drivers/hwtracing/coresight/coresight-tpda.h >>> +++ b/drivers/hwtracing/coresight/coresight-tpda.h >>> @@ -10,6 +10,7 @@ >>> #define TPDA_Pn_CR(n) (0x004 + (n * 4)) >>> #define TPDA_FPID_CR (0x084) >>> #define TPDA_SYNCR (0x08C) >>> +#define TPDA_FLUSH_CR (0x090) >>> /* Cross trigger FREQ packets timestamp bit */ >>> #define TPDA_CR_FREQTS BIT(2) >>> @@ -35,6 +36,7 @@ >>> #define TPDA_SYNCR_MAX_COUNTER_VAL (0xFFF) >>> #define TPDA_MAX_INPORTS 32 >>> +#define TPDA_MAX_INPORTS_MASK GENMASK(31, 0) >>> /* Bits 6 ~ 12 is for atid value */ >>> #define TPDA_CR_ATID GENMASK(12, 6) >> >> >

2 weeks, 2 days

Re: [PATCH v2 2/3] coresight: tpda: add logic to configure TPDA_SYNCR register

by James Clark

On 27/08/2025 5:20 am, Jie Gan wrote: > From: Tao Zhang <tao.zhang(a)oss.qualcomm.com> > > The TPDA_SYNCR register defines the frequency at which TPDA generates > ASYNC packets, enabling userspace tools to accurately parse each valid > packet. > > Signed-off-by: Tao Zhang <tao.zhang(a)oss.qualcomm.com> > Co-developed-by: Jie Gan <jie.gan(a)oss.qualcomm.com> > Signed-off-by: Jie Gan <jie.gan(a)oss.qualcomm.com> > --- > drivers/hwtracing/coresight/coresight-tpda.c | 7 +++++++ > drivers/hwtracing/coresight/coresight-tpda.h | 6 ++++++ > 2 files changed, 13 insertions(+) > > diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c > index 647ab49a98d7..430f76c559f2 100644 > --- a/drivers/hwtracing/coresight/coresight-tpda.c > +++ b/drivers/hwtracing/coresight/coresight-tpda.c > @@ -187,6 +187,13 @@ static void tpda_enable_pre_port(struct tpda_drvdata *drvdata) > */ > if (drvdata->trig_flag_ts) > writel_relaxed(0x0, drvdata->base + TPDA_FPID_CR); > + > + /* Program the counter value for TPDA_SYNCR */ > + val = readl_relaxed(drvdata->base + TPDA_SYNCR); > + /* Clear the mode */ > + val &= ~TPDA_SYNCR_MODE_CTRL; > + val |= FIELD_PREP(TPDA_SYNCR_COUNTER_MASK, TPDA_SYNCR_MAX_COUNTER_VAL); Just use the mask directly if you want to set all the bits. This makes it seem like the MAX_COUNTER_VAL is something different. val |= TPDA_SYNCR_COUNTER_MASK > + writel_relaxed(val, drvdata->base + TPDA_SYNCR); > } > > static int tpda_enable_port(struct tpda_drvdata *drvdata, int port) > diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h > index 0be625fb52fd..8e1b66115ad1 100644 > --- a/drivers/hwtracing/coresight/coresight-tpda.h > +++ b/drivers/hwtracing/coresight/coresight-tpda.h > @@ -9,6 +9,7 @@ > #define TPDA_CR (0x000) > #define TPDA_Pn_CR(n) (0x004 + (n * 4)) > #define TPDA_FPID_CR (0x084) > +#define TPDA_SYNCR (0x08C) > > /* Cross trigger FREQ packets timestamp bit */ > #define TPDA_CR_FREQTS BIT(2) > @@ -27,6 +28,11 @@ > #define TPDA_Pn_CR_CMBSIZE GENMASK(7, 6) > /* Aggregator port DSB data set element size bit */ > #define TPDA_Pn_CR_DSBSIZE BIT(8) > +/* TPDA_SYNCR mode control bit */ > +#define TPDA_SYNCR_MODE_CTRL BIT(12) > +/* TPDA_SYNCR counter mask */ > +#define TPDA_SYNCR_COUNTER_MASK GENMASK(11, 0) > +#define TPDA_SYNCR_MAX_COUNTER_VAL (0xFFF) No need to define a numeric value that's the same as the mask. It also opens the possibility of making a mistake. > > #define TPDA_MAX_INPORTS 32 >

2 weeks, 2 days

Re: [PATCH v2 3/3] coresight: tpda: add sysfs node to flush specific port

by James Clark

On 27/08/2025 5:20 am, Jie Gan wrote: > From: Tao Zhang <tao.zhang(a)oss.qualcomm.com> > > Setting bit i in the TPDA_FLUSH_CR register initiates a flush request > for port i, forcing the data to synchronize and be transmitted to the > sink device. > > Signed-off-by: Tao Zhang <tao.zhang(a)oss.qualcomm.com> > Co-developed-by: Jie Gan <jie.gan(a)oss.qualcomm.com> > Signed-off-by: Jie Gan <jie.gan(a)oss.qualcomm.com> > --- > .../testing/sysfs-bus-coresight-devices-tpda | 7 ++++ > drivers/hwtracing/coresight/coresight-tpda.c | 42 +++++++++++++++++++ > drivers/hwtracing/coresight/coresight-tpda.h | 2 + > 3 files changed, 51 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda > index fb651aebeb31..2cf2dcfc13c8 100644 > --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda > +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda > @@ -41,3 +41,10 @@ Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qu > Description: > (RW) Configure the CMB/MCMB channel mode for all enabled ports. > Value 0 means raw channel mapping mode. Value 1 means channel pair marking mode. > + > +What: /sys/bus/coresight/devices/<tpda-name>/port_flush_req > +Date: August 2025 > +KernelVersion: 6.17 > +Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qualcomm.com>, Jie Gan <jie.gan(a)oss.qualcomm.com> > +Description: > + (RW) Configure the bit i to requests a flush operation of port i on the TPDA. > diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c > index 430f76c559f2..8b1fe128881d 100644 > --- a/drivers/hwtracing/coresight/coresight-tpda.c > +++ b/drivers/hwtracing/coresight/coresight-tpda.c > @@ -487,6 +487,47 @@ static ssize_t cmbchan_mode_store(struct device *dev, > } > static DEVICE_ATTR_RW(cmbchan_mode); > > +static ssize_t port_flush_req_show(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if (!drvdata->csdev->refcnt) > + return -EINVAL; > + > + guard(spinlock)(&drvdata->spinlock); > + CS_UNLOCK(drvdata->base); > + val = readl_relaxed(drvdata->base + TPDA_FLUSH_CR); > + CS_LOCK(drvdata->base); > + return sysfs_emit(buf, "%lx\n", val); Still missing the 0x prefix > +} > + > +static ssize_t port_flush_req_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t size) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if (kstrtoul(buf, 0, &val)) > + return -EINVAL; > + > + if (!drvdata->csdev->refcnt || !val) > + return -EINVAL; > + > + val |= FIELD_PREP(TPDA_MAX_INPORTS_MASK, val); Using FIELD_PREP() now that it's the full width of the register makes less sense. Especially when there is no corresponding FIELD_FIT() check, which is fine because everything always fits. But if you didn't know the mask was the full width you'd wonder if the check is missing. I would just write val directly to TPDA_FLUSH_CR so it's simpler. It should also have been val = FIELD_PREP(...) > + guard(spinlock)(&drvdata->spinlock); > + CS_UNLOCK(drvdata->base); > + writel_relaxed(val, drvdata->base + TPDA_FLUSH_CR); > + CS_LOCK(drvdata->base); > + > + return size; > +} > +static DEVICE_ATTR_RW(port_flush_req); > + > static struct attribute *tpda_attrs[] = { > &dev_attr_trig_async_enable.attr, > &dev_attr_trig_flag_ts_enable.attr, > @@ -494,6 +535,7 @@ static struct attribute *tpda_attrs[] = { > &dev_attr_freq_ts_enable.attr, > &dev_attr_global_flush_req.attr, > &dev_attr_cmbchan_mode.attr, > + &dev_attr_port_flush_req.attr, > NULL, > }; > > diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h > index 8e1b66115ad1..56d3ad293e46 100644 > --- a/drivers/hwtracing/coresight/coresight-tpda.h > +++ b/drivers/hwtracing/coresight/coresight-tpda.h > @@ -10,6 +10,7 @@ > #define TPDA_Pn_CR(n) (0x004 + (n * 4)) > #define TPDA_FPID_CR (0x084) > #define TPDA_SYNCR (0x08C) > +#define TPDA_FLUSH_CR (0x090) > > /* Cross trigger FREQ packets timestamp bit */ > #define TPDA_CR_FREQTS BIT(2) > @@ -35,6 +36,7 @@ > #define TPDA_SYNCR_MAX_COUNTER_VAL (0xFFF) > > #define TPDA_MAX_INPORTS 32 > +#define TPDA_MAX_INPORTS_MASK GENMASK(31, 0) > > /* Bits 6 ~ 12 is for atid value */ > #define TPDA_CR_ATID GENMASK(12, 6)

2 weeks, 2 days

Re: [PATCH v2 1/3] coresight: tpda: add sysfs nodes for tpda cross-trigger configuration

by James Clark

On 27/08/2025 5:20 am, Jie Gan wrote: > From: Tao Zhang <tao.zhang(a)oss.qualcomm.com> > > Introduce sysfs nodes to configure cross-trigger parameters for TPDA. > These registers define the characteristics of cross-trigger packets, > including generation frequency and flag values. > > Signed-off-by: Tao Zhang <tao.zhang(a)oss.qualcomm.com> > Co-developed-by: Jie Gan <jie.gan(a)oss.qualcomm.com> > Signed-off-by: Jie Gan <jie.gan(a)oss.qualcomm.com> > --- > .../testing/sysfs-bus-coresight-devices-tpda | 43 ++++ > drivers/hwtracing/coresight/coresight-tpda.c | 227 ++++++++++++++++++ > drivers/hwtracing/coresight/coresight-tpda.h | 27 ++- > 3 files changed, 296 insertions(+), 1 deletion(-) > create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda > > diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda > new file mode 100644 > index 000000000000..fb651aebeb31 > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda > @@ -0,0 +1,43 @@ > +What: /sys/bus/coresight/devices/<tpda-name>/trig_async_enable > +Date: August 2025 > +KernelVersion: 6.17 > +Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qualcomm.com>, Jie Gan <jie.gan(a)oss.qualcomm.com> > +Description: > + (RW) Enable/disable cross trigger synchronization sequence interface. > + > +What: /sys/bus/coresight/devices/<tpda-name>/trig_flag_ts_enable > +Date: August 2025 > +KernelVersion: 6.17 > +Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qualcomm.com>, Jie Gan <jie.gan(a)oss.qualcomm.com> > +Description: > + (RW) Enable/disable cross trigger FLAG packet request interface. > + > +What: /sys/bus/coresight/devices/<tpda-name>/trig_freq_enable > +Date: August 2025 > +KernelVersion: 6.17 > +Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qualcomm.com>, Jie Gan <jie.gan(a)oss.qualcomm.com> > +Description: > + (RW) Enable/disable cross trigger FREQ packet request interface. > + > +What: /sys/bus/coresight/devices/<tpda-name>/freq_ts_enable > +Date: August 2025 > +KernelVersion: 6.17 > +Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qualcomm.com>, Jie Gan <jie.gan(a)oss.qualcomm.com> > +Description: > + (RW) Enable/disable the timestamp for all FREQ packets. > + > +What: /sys/bus/coresight/devices/<tpda-name>/global_flush_req > +Date: August 2025 > +KernelVersion: 6.17 > +Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qualcomm.com>, Jie Gan <jie.gan(a)oss.qualcomm.com> > +Description: > + (RW) Set global (all ports) flush request bit. The bit remains set until a > + global flush request sequence completes. > + > +What: /sys/bus/coresight/devices/<tpda-name>/cmbchan_mode > +Date: August 2025 > +KernelVersion: 6.17 > +Contact: Jinlong Mao <jinlong.mao(a)oss.qualcomm.com>, Tao Zhang <tao.zhang(a)oss.qualcomm.com>, Jie Gan <jie.gan(a)oss.qualcomm.com> > +Description: > + (RW) Configure the CMB/MCMB channel mode for all enabled ports. > + Value 0 means raw channel mapping mode. Value 1 means channel pair marking mode. > diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c > index 4e93fa5bace4..647ab49a98d7 100644 > --- a/drivers/hwtracing/coresight/coresight-tpda.c > +++ b/drivers/hwtracing/coresight/coresight-tpda.c > @@ -156,9 +156,37 @@ static void tpda_enable_pre_port(struct tpda_drvdata *drvdata) > u32 val; > > val = readl_relaxed(drvdata->base + TPDA_CR); > + val &= ~TPDA_CR_MID; > val &= ~TPDA_CR_ATID; > val |= FIELD_PREP(TPDA_CR_ATID, drvdata->atid); > + if (drvdata->trig_async) > + val |= TPDA_CR_SRIE; > + else > + val &= ~TPDA_CR_SRIE; > + if (drvdata->trig_flag_ts) > + val |= TPDA_CR_FLRIE; > + else > + val &= ~TPDA_CR_FLRIE; > + if (drvdata->trig_freq) > + val |= TPDA_CR_FRIE; > + else > + val &= ~TPDA_CR_FRIE; > + if (drvdata->freq_ts) > + val |= TPDA_CR_FREQTS; > + else > + val &= ~TPDA_CR_FREQTS; > + if (drvdata->cmbchan_mode) > + val |= TPDA_CR_CMBCHANMODE; > + else > + val &= ~TPDA_CR_CMBCHANMODE; > writel_relaxed(val, drvdata->base + TPDA_CR); > + > + /* > + * If FLRIE bit is set, set the master and channel > + * id as zero > + */ > + if (drvdata->trig_flag_ts) > + writel_relaxed(0x0, drvdata->base + TPDA_FPID_CR); > } > > static int tpda_enable_port(struct tpda_drvdata *drvdata, int port) > @@ -274,6 +302,203 @@ static const struct coresight_ops tpda_cs_ops = { > .link_ops = &tpda_link_ops, > }; > > +static ssize_t trig_async_enable_show(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + > + return sysfs_emit(buf, "%u\n", (unsigned int)drvdata->trig_async); > +} > + > +static ssize_t trig_async_enable_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t size) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if (kstrtoul(buf, 0, &val)) > + return -EINVAL; > + > + guard(spinlock)(&drvdata->spinlock); > + drvdata->trig_async = !!val; > + > + return size; > +} > +static DEVICE_ATTR_RW(trig_async_enable); > + > +static ssize_t trig_flag_ts_enable_show(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + > + return sysfs_emit(buf, "%u\n", (unsigned int)drvdata->trig_flag_ts); > +} > + > +static ssize_t trig_flag_ts_enable_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t size) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if (kstrtoul(buf, 0, &val)) > + return -EINVAL; > + > + guard(spinlock)(&drvdata->spinlock); > + drvdata->trig_flag_ts = !!val; > + > + return size; > +} > +static DEVICE_ATTR_RW(trig_flag_ts_enable); > + > +static ssize_t trig_freq_enable_show(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + > + return sysfs_emit(buf, "%u\n", (unsigned int)drvdata->trig_freq); > +} > + > +static ssize_t trig_freq_enable_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t size) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if (kstrtoul(buf, 0, &val)) > + return -EINVAL; > + > + guard(spinlock)(&drvdata->spinlock); > + drvdata->trig_freq = !!val; > + > + return size; > +} > +static DEVICE_ATTR_RW(trig_freq_enable); > + > +static ssize_t freq_ts_enable_show(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + > + return sysfs_emit(buf, "%u\n", (unsigned int)drvdata->freq_ts); > +} > + > +static ssize_t freq_ts_enable_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t size) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if (kstrtoul(buf, 0, &val)) > + return -EINVAL; > + > + guard(spinlock)(&drvdata->spinlock); > + drvdata->freq_ts = !!val; > + > + return size; > +} > +static DEVICE_ATTR_RW(freq_ts_enable); > + > +static ssize_t global_flush_req_show(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if (!drvdata->csdev->refcnt) > + return -EINVAL; > + > + guard(spinlock)(&drvdata->spinlock); > + CS_UNLOCK(drvdata->base); > + val = readl_relaxed(drvdata->base + TPDA_CR); > + CS_LOCK(drvdata->base); > + > + return sysfs_emit(buf, "%lx\n", val); I know in practice it's probably only either 0 or 1, but this should either be decimal or have the 0x prefix otherwise it looks like a mistake. > +} > + > +static ssize_t global_flush_req_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t size) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent); > + unsigned long val; > + > + if (kstrtoul(buf, 0, &val)) > + return -EINVAL; > + > + if (!drvdata->csdev->refcnt || !val) > + return -EINVAL; > + > + guard(spinlock)(&drvdata->spinlock); > + CS_UNLOCK(drvdata->base); > + val = readl_relaxed(drvdata->base + TPDA_CR); > + val |= BIT(0); If you only set bit 0 do you only want to show bit 0 in global_flush_req_show() above? The sysfs files should be divided up by function rather than dumping the whole register, otherwise tools need their own copy of the fields to interperet them.

2 weeks, 2 days

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight August 2025